PAN02PRO DI Box active

The Palmer PAN02 PRO is an active DI-box with outstanding additional functions. These include an unbalanced XLR input, in addition to the 3-way attenuator -10, -20, -30 dB and a switchable gain of 12 dB, connected with a maximum output voltage of 20 dBu. The Groundlift switch has a lift position allowing adjustments between a soft and hard grounding . The balanced output is achieved with a high quality transformer in the Mumetall housingthat was specially developed for this purpose. The PAN02 Pro can be powered either with a 9 V battery or 48 V phantom power. A two-colour LED indicates which source supplies the power.
– Type: active
– Number of Channels: 1
– Number of Inputs: 2
– Input Connections: 6.3 mm jack, XLR/f unbalanced
– Max. Input Level: 45 dBu
– Input Impedance: 0 dB & 12 dB: 1 MOhm -10 & -20 dB: 70 kOhm -30 dB: 40 kOhm
– Input Attenuation: 0 dB, -10 dB, -20 dB, -30 dB
– Signal Gain: 12 dB
– Number of Outputs: 1
– Number of THRU Outputs per Channel: 1
– Output Connections: XLR, 6.3 mm jack
– Max Output Level: 20 dBu
– Output Impedance: 600 ohms
– Frequency Response: 20Hz – 20,000 Hz
– Transformer-balanced: yes
– Translation Ratio (Ratio): 3.16:1, 10:1, 31.6:1, 1:4
– Controls: Ground-Lift, Attenuator, Boost, Battery/ 48 V Power
– Power Supply: 9 V block battery, 48 V phantom power
– Housing Material: sheet steel
– Housing Surface: powder coated
– Width: 116 mm
– Depth: 140 mm
– Height: 43.5 mm